- Damar Ultrax
A speciality high performance solvent borne line marking paint. Has excellent drying, very good glass bead retention and good wear-resistance properties. NZTA M7 approved
Uses: Typically used for line marking on all common roading surfaces; roads, runways and carparks etc.
- Damar Chlorinated Rubber
A blend of modified alkyd and chlorinated rubber resinbased paint. Applied as a spray. This product is available in white and yellow. NZTA M7 approved
Uses: Typically used for application to road surfaces with a relatively high vehicle traffic count. For roadmarking where good glass bead holding is required.
- Damar Chlorinated Rubber Super B
A blend of modified alkyd and chlorinated rubber resin based paint with a higher level of durability than alkyd roadmarking paints. Applied by spray.
Uses: An ideal paint for marking car parks (both concrete and bitumen). Typically used for application to road surfaces with a relatively high vehicle traffic count. For roadmarking where good glass bead holding is required.
- Damar QL Fast Dry
The next generation high quality, high performance, waterborne road marking paint. Specially formulated to cure well in adverse drying conditions with exceptional fast drying characteristics and wear resistance with excellent glass bead retention approved to NZTA M7 CE0/AL0.
Uses: Typically used as a long lasting fast dry road marking paint, on bituminous and concrete substrates and where excellent glass bead holding is required.
- Damar Aqua
A new generation high quality, high performance, water based roadmarking paint with exceptionally fast drying characteristics. Applied by spray. NZTA M7 approved. APAS approved
Uses: As a long lasting roadmarking paint, on bituminous and concrete substrates and where excellent glass bead holding is required.
A new generation solution acrylic roadmarking paint possessing many of the attributes of a waterborne acrylic paint, but with the same tolerance to temperature and humidity typical of solventborne paint. Offers greater flexibility to the remarking process with water-borne acrylic paints as it can be applied in a much wider range of conditions. NZTA M7 approved
Uses: A range of non-standard colours for specialist applications is available for use on airport aprons, storm water drain marking and motor racing tracks.
Typically used as a high durability roadmarking paint with or without glass beads.
Cold Applied Plastic (CAP) Road Safety Markings
A 2-component, solvent-free reactive methyl methacrylate, cold plastic for permanent markings on bituminous coverings and pre-treated concrete. Suited for flat, structured and audio-tactile marking systems.
Extrusion Cold Plastic comes in two viscosity variants. Standard is used for structured and flat markings and the other a higher viscosity for when Audio Tactile System “Ribs” is required.
Suitable for bituminous and concrete (primer required) substrates.
NZTA M20 approved. M24 approved. APAS approved
- Spray Plastic
A 3-component, solvent-free reactive methyl methacrylate, cold spray plastic for permanent markings on bituminous coverings and pre-treated concrete. NZTA M7 approved
Uses: Designed to be long lasting, Spray Plastic is frequently used for marking symbols, arrows, etc. This product is also ideal for refurbishing old Thermoplastic.
Thermoplastic is a high quality, reflectorised roadmarking material in the form of a granulated powder containing aggregates, pigments and extenders bound together with hydrocarbon resins and polymers. Applied in a molten form. NZTA M20 approved. APAS approved.
Uses: Designed to be long lasting. Can be tailored for specific application methods such as structured markings and plain flat markings. For example, the rapid setting material is specially formulated to enable raised portions to be formed cleanly and accurately.
- CAP Coloured Surfacing
CAP Coloured Surfacing is a high-friction surfacing used where excellent skid resistance is required. It is a 2-component, solventfree reactive methyl methacrylate, cold plastic for coloured and high skid resistant surfacing. Used on bituminous and pretreated concrete surfaces. Suitable for manual application with tooth spatula, roller and spray.
- Highway Anti-Skid Range
A unique ultra-high performance waterborne coating, with life-long, anti-skid properties. Easy application by texture spray, brush or roller. Only one coat is generally required.
Uses: Typically used as a long-lasting anti-skid coloured surfacing giving a minimum of 60BPN throughout life.
Suitable for use on bituminous and concrete substrates.
May be reflectorised with glass beads if required.
Colours: Green, Red, Blue, Yellow, Grey, Orange
- Highway Black Out
A fast drying alkyd-based paint specifically designed to temporarily black out of old roadmarkings.
- Highway Waterborne Black
A new generation high quality, high performance, waterborne roadmarking paint with exceptionally fast drying characteristics.
Uses: It is formulated to be used for blacking out redundant roadmarkings. Can be applied by spray, roller or brush.
- Adhesion Promotor
A fast-drying solvent-based adhesion promoter that contains a special blend of solvents and additives to give adhesion to concrete and difficult substrates. Available in standard and aerosol form.
Uses: To be used as a first coat primer when solvent based paints are to be used.
- Roadprime Water Based
A 100% acrylic primer used as a first coat underneath highway waterborne markings on concrete surfaces to enhance adhesion.
- SprayWell Highway Line Marker (permanent)
This fast drying, permanent, alkyd-based paint in aerosol form, has been specifically designed for road or line marking.
Uses: Marking roadways or carpark areas. Marking of playing surfaces (tennis courts, netball courts, etc.). Marking of uncoloured concrete surfaces. Fire hydrant delineation.
Nozzles: Highway Line Markers come in 2 nozzle varieties depending on the colour; a spot nozzle for writing and fan nozzle which is ideal for consistent lines.
– White and Yellow are available in both fan and spot nozzles.
– Black comes in fan nozzle only.
– Red and Blue are available with spot nozzles.
Cartons: 12 x 600ml
- SprayWell Standard Marker (temporary)
SprayWell standard markers come in ‘Upright’ to spray the can in an upright position and ‘Upside Down’ which is designed to work when held and sprayed pointed downward e.g. for making a mark on the ground. The mark is semi-permanent and highly visible.
Uses: Can be used to spray crisp, fast-drying, high visibility lines on a variety of surfaces including grass, gravel, cement, logs and timber (dry or damp), steel drums, roads, plastic wrap and more.
Cartons: 12 x 400ml